User manual

AT-323 SIP Phone User Manual (V1.43)
35
set natttl XX
Set NAT TTL XX is an integer between 10 and 65535 sec. Default
value is 20 sec
.set phonenumber XXXXXXXX
Set a local ID of At-320IP phone. Value xxxxx must be an Arabic
numeral and no longer than 16 characters.
set endpointid XXXXXX
Set the endpoint id; Value xxxxxx must be an Arabic numeral and
no longer than 32 characters.
set domain XXXXXXXXXX
Set the domain name; Value xxxxxx must be an Arabic numeral
and no longer than 32 characters.
set registerport XXXX
Set register port. XXXX is range from 1024 through 65535. default
value is 2427.
set rtpport XXXX
RTP port is the port transferring and receiving voice flow using
UDP protocol. XXXX is range from 1024 through 65535.
set tos X
Set TOS segment of IP head package in RTP digital follow. X is
range from 0 through 224.
set dtmf payload X
When dtmf X select 1(rfc 2833).This parameter can be used
indicating type of RTP payload type. The value can be use integer
96-101.
set localtype X
X is set 0 to 1:0: normal; 1: use CNC special authentication
system.
set dtmf X
Set DTMF relay type. X is ranged form 0 through 1: 0:inband
audio；1:rfc 2833.
set superpassword XXXX
Set super password of the AT320 IP phone. XXX must be ASCII
characters.
set debug X
Set open debugging message output grade for special tool. X is
ranged from 0 through 5: 0: close debugging output; 1: output the
operation information to the window; 2: output all the bug
information and data in test window; 3: save the bug information
into SDRAM; 4: disable checks the mark.
set password XXXX
Set password of the AT-320 IP phone. XXX must be ASCII
characters.
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]