User manual

AT-323 SIP Phone User Manual (V1.43)
34
without replying.
set answer X
Set the ring seconds before the phone answers the call auto or
forward the calls. X is ranged from 0 through 60.
set digitmap X
Set whether to use digitmap. X ranged from 0 to 1: 0: do not use
digitmap; 1: use digitmap.
set service type X
Enable/disable the prepaid and service system .choose the repaid
server provider. Parameter x ranged from 0 through 6:
0: common: disable repaid card;
1: use huawei’s system;
2: use ZTE’s system;
3: use harbour’s system;
4: use utstarcom’s system;
5: use uptech system;
6: use kaiman system;
set caaddr XXXX
Set IP address or domain name of Call Agent.
set registerttl X
Set register TTL. X is range from 10 through 65535 Sec. Default
value is 60 Sec.
set nattraversal X
X ranged from 0 through 2: 0: do not use NAT traversal. When the
log in server and IP phone in the same LAN, or the log in system
supports the IP phone working behind the LAN; 1: Use NAT
traversal. When the login system does not support IP phone
working behind the LAN, With this item selected, please make port
mapping on NAT device;
set nataddr XXXXX
When “nattraversal” is set to “1”;set IP address of NAT device
wan port or URI of free assistant service (Such as
www.showmyIP.com
etc.) in Internet. When “nattraversal” is set
to “2”, set IP address or URI of the stun server, in the format as
“domain name/IP address : service port”. The default service
port for stun is 3478.
Note The free service list of Internet：www.IP-calculator.com; www.IPchicken.com;
www.IPchicken.com;www.showmyIP.com;www.whatismyIP.com;
www.myIPaddress.com; www.whatismyIPaddress.com; IP.sbbs.net;
www.whatismyIPaddress.net;checkIP.dyndns.org
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]