User manual

AT-323 SIP Phone User Manual (V1.43)
32
set codec6 X
Set the priority 6 of the audio compression algorithm. X is range
from 0 through 4: 0: g729; 1:g7231; 2: g711u; 3: g711a; 4: gsm.
set vad X
Enable/disable VAD. X is ranged from 0 through 1: 0: disable VAD;
1: enable VAD.
set agc X
Enable/disable AGC. X is ranged from 0 through 1: 0: disable AGC;
1: enable AGC.
set aec X
Enable/disable AEC. X is ranged from 0 through 1: 0: disable AEC;
1: disable AEC.
set audioframes X
Set audio frames in RTP package. X is Arabic numerals between 0
and 7.
set 6.3k X
With G.7231, set AT320 IP phone to use 6.3K rate or not. X is
ranged from 0 through 1: 0: use 6.3K rate; 1: use 5.3K rate.
set jittersize X
Set buffer size of RTP package. X is range from 0-32.
set ilbcpayload X
Set the payload type of RTP package whne ILBC codec selected
to DTMF delay.X is range from 96-255.
set handsetin X
Set initial volume of handset. X is ranged from 0 through 15.
set handsetout X
Set initial volume of handout. X is ranged from 0 through 31.
set ringtype X
Set types of ring. X is ranged from 0 through 3: 0: ring as ordinary
rings in different frequency; 1: do not ring; 2: ring as music saved
by user; 3: Set ring used the individualized tone provided by
system (need system support).
set speakerin X
Set initial volume of microphone of the base. X is ranged from 0
through 15.
set speakerout X
Set initial volume of speaker out. X is ranged from 0 through 31.
set dialplan X
Enable/disable dial plan and dial number. Parameter X ranged
from 0 through 4: 0: disable dial plan; 1: enable dial plan; 2: use
dial number; 3: use 179XX service.;4: use hotline function.
set dialnumber XX
When set dialplan value set as 2, please use this command to set
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]