User manual

AT-323 SIP Phone User Manual (V1.43)
31
especially designed for them. With this system, ADSL ISP
automatically assigns all the required IP parameters to any device
connected to it when the device log on; 3: use modem mode.
Those who use IP phone with modem, please set the value as 3.
set pppid XXX
With IPtype set as 2, use this command to set ADSL ID; with
IPtype set as 3, use this command to set Modem ID.
set ppppin XXX
With IPtype set as 2, use this command to set ADSL pin; with
IPtype set as 3, use this command to set Modem pin.
set IP XXX.XXX.XXX.XXX
With IPtype set as 0, use this command to set IP address of
AT-320 IP phone.
set subnetmask XXX.XXX.XXX.XXX
With IPtype set as 0, use this command to set subnet mask of
AT-320 IP phone.
set router XXX.XXX.XXX.XXX
With IPtype set as 0, use this command to set router IP of network
with AT-320 IP phone.
set dns XXX.XXX.XXX.XXX
With IPtype set as 0, use this command to set IP address of DNS
server.
set dns2 XXX.XXX.XXX.XXX
With IPtype set as 0, use this command to set IP of backup DNS
server.
set mac XX-XX-XX-XX-XX-XX
Set MAC address of the AT-320 IP phone. Parameter
xx-xx-xx-xx-xx-xx must be an HEX number.
set codec1 X
Set the priority 1of the audio compression algorithm. X is range
from 0 through 4: 0: g729; 1:g7231; 2: g711u; 3: g711a; 4: gsm.
set codec2 X
Set the priority 2 of the audio compression algorithm. X is range
from 0 through 4: 0: g729; 1:g7231; 2: g711u; 3: g711a; 4: gsm.
set codec3 X
Set the priority 3 of the audio compression algorithm. X is range
from 0 through 4: 0: g729; 1:g7231; 2: g711u; 3: g711a; 4: gsm.
set codec4 X
Set the priority 4 of the audio compression algorithm. X is range
from 0 through 4: 0: g729; 1:g7231; 2: g711u; 3: g711a; 4: gsm.
set codec5 X
Set the priority 5 of the audio compression algorithm. X is range
from 0 through 4: 0: g729; 1:g7231; 2: g711u; 3: g711a; 4: gsm.
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]