User manual

AT-323 SIP Phone User Manual (V1.43)
29
get Display basic running parameters of the AT-320 IP phone.
Input ordinary password without debug being set as 0[disable], or input
super password with debug set as 0[disable], then following parameters
of IP phone will be displayed:
PA168X V1.43 settings
Password: ********
P:\>get
***************Network Settings***************
IPtype 0[static]
IP 192.168.1.100 subnetmask 255.255.255.0 router 192.168.1.254
dns 202.106.196.152 dns 2202.106.196.115 mac 00-09-45-65-a3-e6
***************Audio Settings***************
codec1 0[g729] codec2 1[g7231] codec3 2[g711u]
codec4 3[g711a] codec5 6[null] codec6 6[null]
vad 1[enable] agc 0[disable] aec 1[enable]
audioframes 2 6.3k 1[enable] ilbcpayload 98
jittersize 0 handsetin 7 handsetout 20
ringtype 0[dtmf] speakerout 20 speakerin 0
***************Dial Plan Settings***************
dialplan 1[enable] dddcode 10
iddcode 86 iddprefix 00 dddprefix 0
innerline 1[enable] innerlineprefix 0 callwaiting 1[disable]
fwdnumber 82378009 fwdpoweroff 1[enable]
fwdalways 1[enable] fwdbusy 1[enable] fwdnoanswer 1[enable]
answer 30 digitmap 1[enable]
***************Protocol Settings***************
servicetype 0[common]
caaddr 203.93.9.57 registerttl 60
nattraversal 0[disable]
nataddr [empty] natttl 30
phonenumber 82378808 endpointid [empty] domain [empty]
registerport 1720 rtpport 1722 tos 0
dtmfpayload 101 localtype 0[normal] dtmf 1[rfc2833]
***************Other Settings***************
superpassword 12345678 debug 1[output]
password 1234 upgradetype 0[disable]
upgradeaddr [empty]
sntpIP 0.0.0.0 daylight 0[disable]
timezone 55[(GMT+08:00)Beijing,Hong Kong,Urumqi]
Input ordinary password with debug set as 0[disable], following information will
be seen:
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]