User manual

AT-323 SIP Phone User Manual (V1.43)
27
3.4 Telnet Configuration
● On the PC choose Start>Run, and then type telnet 192.168.1.100 into
Run field in popuping Run dialog. Or input telnet 192.168.1.100 in the
DOS window. Then the following information will be displayed.
PA168X V1.43 settings
Password :
Then please type password. With debug is set as 0[disable], if type ordinary
password (default one is 1234), after Retun, you will see：
Password : ****
P:\>
If you type super password, then you will see:
Password : ********
P:\>
Above information indicates that IP phone is under setting mode, and then you
can set the AT-320 IP phone by using the telnet commands.
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]