User manual

AT-530 User Manual
8/50
2.3 Network
2.3.1 Wan Config
WAN port network setting page.
Support static IP, dynamic obtain IP and PPPoE.
¾ Configure Static IP:
----Enable Static;
----Set AT-530’s IP address in the IP Address;
----Set netmask in the Netmask field;
----Set router IP address in the Gateway;
----DNS Domain:
----Set local DNS server in the Preferred DNS and the Alternate DNS
¾ Configure to dynamic obtain IP
----Enable DHCP;
If there is DHCP server in your local network, AT-530 will automatically obtain WAN port
network information from your DHCP server.
¾ Configure PPPoE:
----Enable PPPoE
----PPPoE server: Enter “ANY” if no specified from your ITSP.
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]