User manual

AT-530 User Manual
10/50
2.3.2 LAN Config
Bridge Mode: Enable this option to switch to bridge mode. IP phone won’t assign IP for its
LAN port in bridge mode and its LAN and WAN port will be in the same network. (This setting
won’t take effect unless you save the config and reboot the device)
IP Netmask: Set the IP and Netmask for the LAN
DHCP Server: Enable DHCP service in LAN port
NAT: Enable NAT.
Highest Priority of Voice Quality: Enable this option to guarantee voice quality. If there is
high flux in the LAN port, AT-530 will limit the stream rate.
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]