AT-530 User Manual AT-530 User Manual 1 AT-530 Features ........................................................................................................ 3 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 Appearance ....................................................................................................................... 3 Interface ............................................................................................................................. 3 Electricity characteristic .........
AT-530 User Manual 2.9.4 2.9.5 3 Use keypad configure AT-530 IP phone .............................................................. 30 3.1 3.2 4 Keypad function .............................................................................................................. 30 Keypad Menu .................................................................................................................. 31 Telnet Console .....................................................................................
AT-530 User Manual 1 AT-530 Features 1.1 Appearance 1.2 Interface Power: WAN: LAN: 1.3 z z 1.4 z z z z z z z Output Power:12VDC,500mA. RJ45 port. RJ45 port. Electricity characteristic Speciality of electric: output the 12V 500mA DC The network connects:2 RJ45 connect, a WAN, a LAN Software Support two sip accounts at the same time. Redundancies server support. NAT, Firewall. DHCP client and server. Support PPPoE, (used for ADSL, cable modem connecting). Support major G7.xxx CODEC. VAD,CNG.
AT-530 User Manual z z z z z z z z z z z z z 1.5 z z z z z z z z z z z z z z z 1.6 z z z 1.7 z z z 1.8 z z G.168 compliant 32ms echo cancellation Tone generation and Local DTMF re-generation according with ITU-T E.164 dial plan and customized dial rules Hotline. Speed Dial Call Forward, Call Transfer, 3-way conference calls Record Caller ID display DND(Do Not Disturb),Black List,Limit List Upgrade firmware through FTP, TFTP or HTTP,. Web management. Telnet remote management.
AT-530 User Manual 1.9 Installation Use ethernet cable to connect AT-530’s LAN port and your computer. Set your computer’s ip to the network 192.168.10.x or using dynamic obtain IP. Open your web browser and key in 192.168.10.1. Then you will see the logon page of AT-530, the default username and password is admin/admin for administrator and guest/guest for guest. Set up page for VoIP use only: 5/50 VoIPon www.voipon.co.uk sales@voipon.co.
AT-530 User Manual 2 Web Configuration 2.1 Access Web setting page Enter AT-530 IP address in the web browser and press ENTER to go to the log on page, and key in the username and password to access AT-530 setting page. Default username and password is: Administrator: Username: admin password: admin User: Username: guest Username: guest 6/50 VoIPon www.voipon.co.uk sales@voipon.co.
AT-530 User Manual 2.2 Current state This page shows AT-530’s running state. Network shows the WAN and LAN port connecting state and current settings. VoIP part show the working state of VoIP, you can see whether AT-530 has registered the public sip server Phone Number public sip and private sip phone numbers. 7/50 VoIPon www.voipon.co.uk sales@voipon.co.
AT-530 User Manual 2.3 Network 2.3.1 Wan Config WAN port network setting page. Support static IP, dynamic obtain IP and PPPoE.
AT-530 User Manual ----Enter PPPoE username and pin in the username and password. AT-530 will automatically obtain WAN port network information from your ITSP if PPPoE setting and the setup are correct. Notice: If user accesses the IP phone through WAN port. He/She should use the new IP address to access the IP phone when the WAN port address was changed. 9/50 VoIPon www.voipon.co.uk sales@voipon.co.
AT-530 User Manual 2.3.2 LAN Config Bridge Mode: Enable this option to switch to bridge mode. IP phone won’t assign IP for its LAN port in bridge mode and its LAN and WAN port will be in the same network. (This setting won’t take effect unless you save the config and reboot the device) IP Netmask: Set the IP and Netmask for the LAN DHCP Server: NAT: Enable DHCP service in LAN port Enable NAT. Highest Priority of Voice Quality: Enable this option to guarantee voice quality.
AT-530 User Manual 2.4 VoIP 2.4.1 SIP Config Setting page of public SIP server: Register Server Addr: Register address of public SIP server Register Server Port: Register port of public SIP server,default port is 5060 Register Username: Username of your SIP account (Always the same as the phone number) Register Password: Password of your SIP account.
AT-530 User Manual encrypt, default is common DTMF Mode: DTMF signal sending mode: support RFC2833, DTMF_RELAY (inband audio) and SIP info RFC Protocol Edition: Current AT-530 SIP version. Set to RFC 2543 if the gate need to communicate to devices (such as CISCO5300) using the SIP 1.0. Default is RFC 3261. Enable Register: Enable/Disable SIP register. AT-530 won’t sent register info to SIP server if disable register. 2.4.
AT-530 User Manual default Enable G.729: Using G.729 speech coding mandatory consultations 2.5 Advance 2.5.1 DHCP Server DHCP server manage page. User may trace and modify DHCP server information in this page. DNS Relay: enable DNS relay function. User may use below setting to add a new lease table. Lease Table Name: Lease table name. Lease Time: DHCP server lease time. Start IP: Start IP of lease table. End IP: End IP of lease table.
AT-530 User Manual 2.5.2 NAT Advance NAT setting. Maximum 10 items for TCP and UDP port mapping. IPSec ALG: Enable/Disable IPSec ALG; FTP ALG: Enable/Disable FTP ALG; PPTP ALG: Enable/Disable PPTP ALG; Transfer Type: Inside IP: Inside Port: Outside Port: Transfer type using port mapping. LAN device IP for port mapping. LAN device port for port mapping. WAN port for port mapping. Click Add to add new port mapping item and Delete to delete current port mapping item. 14/50 VoIPon www.voipon.co.
AT-530 User Manual 2.5.3 Net Service HTTP Port: configure HTTP transfer port, default is 80.User may change this port to enhance system’s security. When this port is changed, please use http://xxx.xxx.xxx.xxx:xxxx/ to reconnect. Telnet Port: configure telnet transfer port, default is 23. RTP Initial Port: RTP initial port. RTP Port Quantity: Maximum RTP port quantity, default is 200 Notice: Settings in this page won’t take effect unless save and reboot the device.
AT-530 User Manual 2.5.4 Firewall settings Firewall setting page. User may set up firewall to prevent unauthorized Internet users from accessing private networks connected to the Internet (input rule), or prevent unauthorized private network devices to access the internet. Access list support two type limits: input_access limit or output_access limit. Each type support 10 items maximum. AT-530 firewall filter is base WAN port.
AT-530 User Manual 2.5.5 QoS settings AT-530 IP phone implement QoS based on 802.1p, The QoS is used to mark the network communication priority in the data link/MAC sub-layer. AT-530 will sorted the packets using the QoS and sends it to the destination. VLAN Enable: If enable the VLAN service, the second layer will realize separate voice, signal and data transmission. To realize separate voice and data transmission by dispose for IP precedence of ToS area of voice transmission.
AT-530 User Manual 2.5.6 Advance SIP settings This page is used to set the private sip server, stun server, and back up sip server information. STUN Server setting: STUN Server Addr: configure stun server address; STUN Server Port: configure stun server port default 3478 STUN Effect Time: stun detect NAT type circle, unit: minute. Enable SIP STUN: enable/disable stun.
AT-530 User Manual For how to configure private sip server. Please refer to SIP_Config 19/50 VoIPon www.voipon.co.uk sales@voipon.co.
AT-530 User Manual Digital Map Digit map is a set of rules to determine when the user has finished dialing. AG-188 support below digital map: Digital Map is based on some rules to judge when user end their dialing and send the number to the server. AG-188 support following digital map: ----End With “#”: Use # as the end of dialing. ----Fixed Length: When the length of the dialing match, the call will be sent. ----Timeout: Specify the timeout of the last dial digit.
AT-530 User Manual 2.5.7 Call Service Settings User configure the value add service such as hotline, call forward, call transfer, 3-way conference call .etc in this page Hotline: configure hotline number. AT-530 immediately dials this number after hook-off if it is set. Call Forward: Please refer to Value_add_service for detail. No Disturb: DND, do not disturb, enable this option to refuse any calls. Ban Outgoing: Enable this to ban outgoing calls.
AT-530 User Manual 2.5.8 MMI Filter MMI filter is used to make access limit to AT-530 IP phone. When MMI filter is enable. Only IP address within the start IP and end IP can access AT-530 IP phone. 22/50 VoIPon www.voipon.co.uk sales@voipon.co.
AT-530 User Manual 2.5.9 Audio Settings CODEC: select the prefer CODEC; support ulaw, alaw,G729 and G7231 5.3/6.3 Signal Standard: Signal standard for different area. Input Volume: Handset in volume. Output Volume: Handset out volume. Handfree Volume: Hand free volume Handdown Time: hand down detect time. G729 Payload Length: G729 payload length VAD: Enable/disable Voice Activity Detection 23/50 VoIPon www.voipon.co.uk sales@voipon.co.
AT-530 User Manual 2.6 Dial-Peer Settings Please refer to How to use dial rule for detail. 24/50 VoIPon www.voipon.co.uk sales@voipon.co.
AT-530 User Manual 2.7 Config Manage Save Config: save current settings. Clear Config: restore to default settings. Backup Config: Backup the config file, via point the right key of mouse-Æ save target as….-Æwill pop a save window, then type the config file name in the File name(the file type is text file) Notice: clear config in admin mode, all settings restores to factory default; clear config in guest modem, all settings except sip, advance sip restore to factory default. 25/50 VoIPon www.voipon.co.
AT-530 User Manual 2.8 Update Web Update: Update IP phone’s settings or firmware. Firmware file is .z extension when configure file is .cfg extension, AT-530 will auto select configure update or firmware update according the extension. TFTP/FTP Update: upload/download the configure file with FTP or TFTP server. or download firmware from FTP or TFTP server Back up configure file to your FTP/TFTP server. configure use .cfg extension.
AT-530 User Manual For instance: Gateway original version is: <>Version:1.0000 ConfFile Version:6 User may edit the configure file version to: <>Version:1.0007 ConfFile Version:7 27/50 VoIPon www.voipon.co.uk sales@voipon.co.
AT-530 User Manual 2.9 System Manage 2.9.1 Account Manage Set web access account or keypad password of AT-530. 2.9.2 Phone Book: User may set contacts in this page, and the contacts will be saved in the memory. Then using the Pbook, Vol+,Vol-,Menu/OK and Exit keys to choose your friend in the contacts and then press # to call out. 2.9.3 Syslog Config: 28/50 VoIPon www.voipon.co.uk sales@voipon.co.
AT-530 User Manual 2.9.4 Time Set: Server:type the ip address of time server Timezone:select correct time zone in list box Timeout: longest response time for SNTP Manual Timeset:The time setting Daylight:Daylight saving time 2.9.5 Reboot: Reboot IP phone, some setting needs to reboot to make it works. Please always save config before reboot, otherwise the setting will return to previous setting. 29/50 VoIPon www.voipon.co.uk sales@voipon.co.
AT-530 User Manual 3 Use keypad configure AT-530 IP phone 3.1 Keypad function User can configure AT-530 through its keypad.
AT-530 User Manual 3.2 Keypad Menu User may use SET, Menu/ok, Exit, Vol+, Vol- to config AT-530 detail setting. Press Menu/ok to enter config mode, and the default password is 123. Below list the keypad menu of AT-530 AT-530 Keypad Menu Level 1 Network Level 2 LAN Level 3 Bridge Mode IP Netmask DHCP Server NAT Level 4 Switch FTPalg IPSec alg PPTPalg WAN Status Static Net 1. IP 2. NetMask 3. Gateway 4. DNS 5.
AT-530 User Manual Transfer IP Port Dial-Rule End With # Fixed Length Switch Length SIP Reg Status Public Reg Private Reg Detect-server Dtmf-mode Interval-time Swap-server RFC-version Signal-Port Stun Switch Addr Port Expire Time DSP Codec Handdown-time Dtmf-Volume Input-volume Output-Volume Other Setting Syslog Switch Server-IP Server-Port 4. System 1. Save 2. Reboot 3. Set Default 32/50 VoIPon www.voipon.co.uk sales@voipon.co.
AT-530 User Manual 4 Telnet Console 4.1 Introduce 4.1.1 Basic structure User may use telnet command to access and manage IP phone. AT-530 adopts tree structure for telnet. Every node contains its sub-nodes or local command. User can type “help” or “?” whenever to see sub-nodes and all local command under current node. Besides local command, there are some global commands can be used in each node. 4.1.2 Basic command Logout: exit telnet mode. Write: save current settings.
AT-530 User Manual 4.
AT-530 User Manual 5 Tree Structure 5.1.1 account path: # [stop]start Syslog ---syslog [no] start Configure Syslog server address and port ---syslog server –ip x.x.x.x _port xxx Example: ##server –ip 202.112.20.10 Show syslog settings ---syslog show Show all account settings ---show ¾ 5.1.2 config accesslist firewall config path: # add firewall rule ---entry –I/O xxx –P/D xxx –proto xxx –srcaddr x.x.x.x –srcmask x.x.x.x–desaddr x.x.x.x –desmask x.x.x.
AT-530 User Manual Show current DHCP rules ---dhcpshow Show LAN port IP address ---ipshow Show NAT info ---natshow Change LAN port IP address ---ip –addr x.x.x.x –mask x.x.x.x Example:#ip –addr 192.168.1.10 –mask 255.255.255.0 ¾ WAN interface settings path: # [disable]enable dhcp client ---[no]dhcp [disable]enable pppoe ---[no]pppoe [disable]enable QOS ---[no]qos Set default gateway IP ---gateway x.x.x.
AT-530 User Manual Show http access setting ---http-port Set telnet access port ---telnet-port xxx Show telnet access port ---telnet-port Set RTP initial port and quantity ---media-port –startport xxx –number xxxx Example:#media-port –startport 10000 –number 200 Add route rule ---route –gateway x.x.x.x –addr x.x.x.x –mask x.x.x.x Example:Arcihfone#route –gateway 202.112.10.1 –addr 202.112.210.1 –mask 255.255.255.0 Delete route rule ---no route –gateway x.x.x.x –addr x.
AT-530 User Manual Disable call forward ---no callforward [disable]enable call transfer ---[no]calltransfer [disable]enable call waiting ---[no]callwaiting Set prefer codec ---codec xxx Set DTMF gain ---dtmfvolume xxx Set black list ---in-limit xxx Show black list ---in-limit Set input volume ---input xxx Set outgoing limit list ---out-limit xxx Show outgoing limit list ---out-limit Set output volume ---output xxx [disable]enable outgoing limit ---[no]shutdown out [disable]enable black list ---[no]shutdown
AT-530 User Manual Set alter server info _password xxx [disable]enable stun server Set stun detecting interval time Set stun server ip and port Show current sip info ¾ ---alter-server register –ip x.x.x.x _port xxx _user xxx ---stun [no]enable ---stun interval-time xxx ---stun –ip x.x.x.x –port xxx ---show User management path: # Change user right.
AT-530 User Manual 5.1.3 Debug (Level 0~7) path: # show debug setting [disable]enable debug all modules [disable]enable debug app module [disable]enable debug cdr module [disable]enable debug sip module [disable]enable debug tel module [disable]enable debug dsp module ---show ---[no] all xxx ---[no] app xxx ---[no] cdr xxx ---[no] sip xxx ---[no] tel xxx ---[no] dsp xxx 5.1.4 download configure to flash usage: #download tftp –ip x.x.x.x –file xxx #download ftp –user xxx –password xxx –ip x.x.x.
AT-530 User Manual path: # show LAN status and DHCP server info Example:## dhcp-server ¾ dial-rule path: # show digital-map info Example:## dial-rule ¾ interface path: # show LAN info Example:##interface fastethernet lan show WAN info Example:##interface fastethernet wan ¾ ip path: # show arp table info Example:##ip arp Show DNS server info Example:##ip dns Show netstate info Example:##ip netstat Show route info Example:##ip route Show
AT-530 User Manual ¾ nat path: # show NAT information Example:##nat ¾ port path: # show caller-ID info Example:##port callerID show dsp info Example:##port dsp show hotline info Example:##port hotline show black list info Example:##port in-limit show outgoing limit info Example:##port out-limit show current phone number Example:##port number show current port status Example:##port status ¾ PPPoE path: # show PPPoE info Example:## pppoe
AT-530 User Manual ¾ version path: # show IP phone version Example:## version 5.1.8 telnet and logout Usage: #telnet –target -port Login:xxx Password:xxx # #logout 5.1.9 timesettings path:
AT-530 User Manual 6 Network Diagnosis There are some telnet commands for checking your network. Now Listing below for your information Command ping tracert show basic show ip route show ip arp show ip netstat telnet Function Check if the destination is accessible Show network path info Show network settings Show route table Show arp table Netstat programe Telnet to another device Example #ping www.google.com #tracert www.google.com #show basic #show ip route #show ip arp #show ip netstat #telnet 192.
AT-530 User Manual 8 POST Mode(safe mode) AT-530 provide safe mode. When there is booting problem because of setting problem or firmware problem. User can restore the factory setting or upgrade to a new firmware to solve this problem. How to enter safe mode? There will be a schedule bar in the AT-530 booting procedure, press # key within the first 5 seconds, then the phone will go to POST mode. It has a default ip 192.168.10.1 in POST mode. User may change the PC’s IP address to 192.168.10.
AT-530 User Manual 9 FAQ 9.1 How many servers may AT-530 register simultaneously? AT-530 is able to register two SIP servers simultaneously, and redundancy servers. User can configure the dial peer to route calls between these servers. Please refer “How to use the dial rule?” for detail. 9.2 Why the settings vanish after reboot? Please go to Config ManageÆSave Config to save your setting always. 9.
AT-530 User Manual 2T rule: If the call starts with 2, the first 2 will be deleted, and the rest number will be sent to private SIP server. 3T rule: If the call starts with 3, the first 3 will be deleted, and the rest number with be sent to public SIP server. 123 rule: Dial 123 and will send 8675583018049 to your server. Used as speed dial function. 0T rule: If the calls is begin with 0, the first 0 will be replace by 86.
AT-530 User Manual ¾ Call Forward: ----Forward when busy: select Busy in the Call Forward Field, and Key in the destination phone number in the Forward Number. If some one calls you when you having a call, the caller will be forwarded to the destination number. ----Forward no answer: Select No Answer in the Call Forward Field, and Key in the destination phone number in the Forward Number, fill the time in the No Answer Time.
AT-530 User Manual 9.7 How to use the record function? AT-530 provides record function. With this function, user may record three VoIP message and one local message. Active answering machine: Select “Enable Voice Record” to active answering machine, and config No Answer Time. If there is an incoming call and no one answer the call. After timeout, AT-530 will auto answer this call and ask the caller to leave message. Incoming Record Playing: play the message when recording.
AT-530 User Manual 9.8 How to use set the IP type via keypad? In the idle mode, user may us the keypad to set the IP type as the below procedure: Keep pressing the button 1 for changing to static mode. Keep pressing the button 2 for changing to DHCP mode. Keep pressing the button 3 for changing to PPPoE mode. 50/50 VoIPon www.voipon.co.uk sales@voipon.co.