User manual

AG-188 User Manual
Destination (optional): call destination, can be IP or domain. Default is 0.0.0.0, in this case the
call will be routed to the Public SIP server. If you set the destination to 255.255.255.255, then the
call will be routed to the private SIP server. Also you can key other address here to make direct IP
calls
Port (optional): Configure the port of the destination, default is 5060
Alias (optional):Set u
p
the Alias. We support four Alias as below. Alias need to co-work with the
Del Length:
¾ add:xxx, add prefix to the phone number
, can set to reduce the dial length.
¾ all: xxx, replace the phone number with the xxx, can use as speed dial function.
¾
del, delete the first N numbers. N is set in the De
l Length
¾ rep:xxx，r
eplace the first N numbers. N is set in the Del Length. For Example: Use wants to
place a call 8610-62281493, then you can set the phone number in the dial rule as 010T, and set
the Alias as rep:8610, and set the Del Length to 3. Then all calls begin with 010 will be changed to
8610 xxxxxxxx.
Suffix (optional):Confi
gur
e suffix, show no suffix if not set
Instance:
2T rule: If the call starts with 2, the first 2 will be deleted, and the rest number will be sent to
private server.
3T rule: If the cal
l starts with 3, the first 3 will be deleted, and the rest number with be sent to
public server.
123 rule: Dial 123 and will send 8675583018049 to your server. Used as speed dial function.
0T
rule: If the calls is begin wit
h 0, the first 0 will be replace by 86. Means that if you dial
075583018049 and AG-188N will send 8675583018049 to your server.
*T rule: Dial the * and the line with switch to PSTN. Note that you need to set another rule
“Pre
fix Number: *; Length: 1” in the Digital Map. (Refer “How to use AG-188N’s Lifeline
Function?”)
179 rule: when you di
al 179 , the call with send to 192.168.1.179, suit for LAN application
without set up a sip server.
37 / 42
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]