User manual

AG-188 User Manual
9 FAQ
How many SIP servers may AG-188N register simultaneously?
AG-188N support 2 SIP servers and a IAX server. The Default server is SIP . If you want to use
the IAX server you must set IAX as default protocol in the IAX config page. IAX and SIP can
register simultaneously but not work simultaneously. If you set 2 SIP servers in the SIP setting
page , you can choose the route (server) by dialing plan which is edited by you. Please see
“How
to use the dial rule?” for detail.
How can I know the AG-188N’s IP address?
Pick up the handset and then dial “#*111#”, and the AG-188N will promote you its IP address.
How to use AG-188N’s Lifeline function?
AG-188N supports Lifeline function, you can use the same handset to place PSTN and VoIP calls.
First, you need to set up the Lifeline with the accessory send with the AG-188N, connect this
accessory to AG-188N’s FXS port, and then connect the handset to the accessory’s phone port,
connect the landline to the accessory’s line port. You can receive PSNT and VoIP calls simply with
configuration. To place the PSTN call, you need to set up as follow:
----Add a new dial rule in the Dia
l
-Peer setting: set the phone number to *T, and choose the
Lifeline as the Call mode.
----Add new Digital map item in the Advanc
e
Æ Digital Map: set Prefix Number to and *, and the
length to 1.
Then when you want to place a PSTN calls, you can first press * to s
witch to the PSTN line and
then place your call as you normal do.
Why the settings vanish after reboot?
Please go to Config ManageÆSave Config to save your setting always.
How to use the dial rule?
AG-188N provide flexible dial rule, with different dial-rule configure, user can easily
implement the following function:
----Replace, delete or add prefix of the dial number.
----Make direct IP to IP call
----Place the call to different SIP server according the prefix.
----Make PSTN calls use Lifeline function (Please refer “How can
use the Lifeline function of
AG-188N?”).
You can click “Add” to add a new dial rule. Below is the detail setting of the dial-rule:
Phone Number: The Num
ber suit for this dial rule, cam be set as full match or prefix match. Full
match means that if the number user dialed is completely the same as this number, the call will use
this dial-rule. Prefix match means that if prefix of the number that the user dials is the same as the
prefix, the call will use this dial-rule, to distinguish from the full match case, you need to add “T”
after the prefix number in the phone number setting.
Call Mode: su
pport SIP and Lifeline，SIP means the call will use sip protocol，Lifeline means the
call will use the PSTN line.
36 / 42
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]