User manual

AG-188 User Manual
Proxy Server Addr: IP address of proxy SIP server (SIP provider always use the
same IP for register server and proxy server, in this case you don’t need to configure the
proxy server information. )
Proxy Server Port:
Signal port of SIP proxy
Proxy Username: proxy serve
r username
Proxy Password: proxy serve
r password
Domain Realm:
SIP domain, enter the sip domain if any, otherwise AG-188N
will use the proxy server address as sip domain.
Local SIP port:
Local SIP register port, default 5060
Phone Number:
Phone number of your SIP account
Register Expire Time: register expire time, default is 600 seconds.
AG-188N will auto
configure this expire time to the server recommended setting if it is different from the SIP
server.
Detect Interval Time: Co-work with the Auto
Detect Server, if Auto Detect Server is
enable, AG-188N will periodically detect if the SIP server is available according this
setting.
RFC Protocol Edition: Curr
ent AG-188N SIP versions. Set to RFC 2543 if the gate
need to communicate to devices (such as CISCO5300) using the SIP 1.0. Default is RFC
3261.
Enable Register:
Enable/Disable SIP register. AG-188N won’t sent register info to
SIP server
DTMF Mode: DTMF signal sending mode: suppor
t RFC2833, DTMF_RELA
Y (inband
audio) and SIP info
Auto Detect server: co-
w
ork with Server Auto Swap and Detect Interval Time. Enable
this option, AG-188N will periodically detect whether the public SIP server is available, if
the server is unavailable, the AG-188N will switch to the back-up SIP sever, and continue
detecting the public sip server. AG-188N will switch back to the primary SIP server if the
server is available again.
Server Auto Swap:Please refer to
Auto Detect server for detail.
Enable Via rport: config the supporting
for RFC 3581
SIP(Default Protocol): Setting for the default proto
col of SIP
12 / 42
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]