User manual

AG-188 User Manual
2.3.2 LAN Config
Bridge Mode: Enable this
option to switch to bridge mode. Gateway won’t assign IP
for its LAN port in bridge mode and its LAN and WAN port will be in the same network.
(This setting won’t take effect unless you save the config and reboot the device)
IP Netmask: Set the IP
and Netmask for the LAN
DHCP Server: Enable DH
CP service in LAN port
NAT: Enable NA
T.
2.4 VoIP
2.4.1 SIP Config
Setting page of public SIP server:
Register Server Addr: Register address of public SIP server
Register Server Port:
Register port of public SIP server
Register Username:
Username of your SIP account (Always the same as the phone
number)
Register Password:
Password of your SIP
account.
11 / 42
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]