VITOMATI( BRIEF INSTRUCTIONS : Look Turn and Shoot
Getting the Camera Ready: With Every New Film Selling the Film Speed. The automatic exposure control depends on this . Depress the locking lever (at the bottom of the aperture ring) and turn the front milled rim of the setting ring until the required film speed figure appears in the DIN or ASA window. Inserting the Film. Open the camera (the base plate latch, base plate flap, and bock).
Setting the Exposure: Two Easy Steps • Select the shutter speed. Turn the shutter speed ring until the triangular. mark engages opposite the required shutter speed. Toke hand-held shots if possible only with the block shutter speeds from ' 1300 to 'I" second. • Align the two pointers by turning the setting ring while you point the camero at the subject.
Setting the Distance: Turn the Lens Mount VITOMATIC I: Guess the distance and set it an the scale. VITOMATIC II: Fuse the double subject outlines into one inside the circular rangefinder field . Focusing Zones. With both cameras set the aperture to f/5 .6. Set the distance to \l (3.3 m.) : everything is sharp from 2.4 to 5.2 m. Set the distance to 0 (10 m.): everything is sharp from 4.8 to infinity Shooting: Frame by Frame Always press the release bullon gently and fully; never jerk it.