Owner`s manual

3. Repeat step 1 and 2.
4. Restart the engine while holding the device
(which may have caused the interference)
separate from the registered Infiniti Vehicle
Immobilizer System key.
If the no start condition re-occurs, INFINITI
recommends placing the registered Infiniti
Vehicle Immobilizer System key on a separate
key ring to avoid interference from other
devices.
Statement related to section 15 of FCC
rules for Infiniti Vehicle Immobilizer
System
(CONT ASSY - IMMOBILIZER, ANT ASSY
- IMMOBILIZER)
This device complies with part 15 of the
FCC Rules and RSS-210 of Industry
Canada. Operation is subject to the fol-
lowing two conditions;
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received, in-
cluding interference that may cause un-
desired operation of the device.
CHANGES OR MODIFICATIONS NOT EX-
PRESSLY APPROVED BY THE MANU-
FACTURE FOR COMPLIANCE COULD
VOID THE USER’S AUTHORITY TO OP-
ERATE THE EQUIPMENT.
Security indicator light
This light blinks whenever the ignition switch
is in the LOCK, OFF or ACC position. This
function indicates the security systems
equipped on the vehicle are operational.
If the Infiniti Vehicle Immobilizer System is
malfunctioning, this light will remain on while
the ignition key is in the ON position.
Ifthelightstillremainsonand/ortheen-
gine will not start, see your INFINITI re-
tailer for Infiniti Vehicle Immobilizer
System service as soon as possible.
Please bring all InfinitiVehicle Immobi-
lizer System keys that you have when
visiting your INFINITI retailer for ser-
vice.
SII0293
INSTRUMENTS AND CONTROLS
2-20
Z 02.2.7/JR50-D X