Owner`s manual

O If a magnet is located near the com-
pass or the vehicle is driven where
the terrestrial magnetism is dis-
turbed, the compass display may not
indicate the correct direction.
O In places where the terrestrial mag-
netism isdisturbed, the correction of
the direction starts automatically,
extinguishing the direction bar. If
turn is made one or two times, the
correction is complete and the direc-
tion bar comes back on.
Correction functions of the com-
pass display
The compass display is equipped with auto-
matic correction function. If the direction is
not shown correctly, carry out the manual
correction procedure set out below.
Manual correction procedure
1. Push the switch for about 10 seconds. The
direction bar starts blinking.
SII0114
INSTRUMENTS AND CONTROLS
2-8
Z 01.9.13/JR50-D X