Owner`s manual

is not a malfunction.
O The outsidetemperaturesensorislo-
cated in front of the radiator. The
sensormay beaffectedby roadoren-
gine heat, wind direction and other
driving conditions. The display may
differ from the actual outside tem-
perature or the temperature dis-
played on various signs or bill-
boards.
CAUTION
Use the ICE indication for reference
only. Confirm the traffic information
and road conditions to drive safely.
COMPASS DISPLAY
Push the switch when the ignition key is in the
ACC or ON position. The direction will be
displayed.
Zone variation change procedure
The difference between magnetic north and
geographical north is known as variance. In
some areas, this difference can sometimes be
great enough to cause false compass read-
ings. Follow these instructions to set the
variance for your particular location if this
happens:
1. Establish your location on the zone map.
Record your zone number.
2. Push the ON/OFF switch in for five sec-
onds until the current zone entry number is
displayed.
3. Press the ON/OFF switch repeatedly until
the new zone entry number is displayed.
Once the desired zone number is displayed,
stop pressing the ON/OFF switch and the
display will show compass direction within a
few seconds.
INSTRUMENTS AND CONTROLS
2-7
Z 01.9.13/JR50-D X