Owner`s manual

O Failure to do so will result in the
child restraint not being properly
secured. It could tip over or oth-
erwise be unsecured and cause
injury to the child in a sudden
stop or collision.
When you install a child restraint in a rear
outboard seat, follow these steps:
1. Position the child restraint on the seat. The
direction of the child restraint depends on
the type of the child restraint and the size
of the child. Always follow the restraint
manufacturer’s instructions.
2. Route the seat belt tongue through the
child restraint and insert it into the buckle
until you hear and feel the latch engage.
Be sure to follow the child restraint manu-
facturer’s instructions for belt routing.
SIR0044 SIR0046
SEATS, RESTRAINTS AND SUPPLEMENTAL AIR BAG SYSTEMS
1-42
Z 01.9.13/JR50-D X