Owner`s manual

1. Position the child restraint on the seat. The
direction of the child restraint depends on
the type of the child restraint and the size
of the child. Always follow the restraint
manufacturer’s instructions.
2. Route the seat belt tongue through the
child restraint and insert it into the buckle
until you hear and feel the latch engage.
Be sure to follow the child restraint manu-
facturer’s instructions for belt routing.
3. Pull on the shoulder belt until all of the
belt is fully extended. At this time, the belt
retractor is in the automatic locking mode
(child restraint mode). It reverts back to
emergency locking mode when the buckle
is unlatched and the belt is allowed to fully
retract.
SIR0041 SIR0043 SIR0039A
SEATS, RESTRAINTS AND SUPPLEMENTAL AIR BAG SYSTEMS
1-40
Z 01.9.13/JR50-D X