Owner`s manual

* The SRS wiring harnesses are
covered with yellow insulation ei-
ther just before the harness con-
nectors or over the complete har-
ness for easy identification.
When selling your vehicle, we request that you
inform the buyer about the supplemental side
air bag system and guide the buyer to the
appropriate sections in this Owner’s Manual.
Pre-tensioner seat belt system
(For front seats)
WARNING
O Thepre-tensioner seat belt cannot
be reused after activation. It must
be replaced together with the re-
tractor as a unit.
O If thevehicle becomes involved in
a frontal collision but the pre-
tensioner isnot activated, be sure
to have the pre-tensioner system
checked and, if necessary, re-
placed by your INFINITI retailer.
O No unauthorized changes should
be made to any components or
wiring of the pre-tensioner seat
belt system. This is to prevent
accidental activation of the pre-
tensioner seat belt or damage to
the pre-tensioner seat belt opera-
tion. Tampering with the pre-
tensioner seat belt system may
result in serious personal injury.
O Work around and on the pre-
tensioner system should be done
by an authorized INFINITI re-
tailer. Installation of electrical
equipment should also be done
by an authorized INFINITI re-
tailer. Unauthorized electrical
test equipment and probing de-
vices should not be used on the
pre-tensioner seat belt system.
O If you need to dispose of the
pre-tensioner or scrap the ve-
hicle, contact an authorized
INFINITI retailer. Correct preten-
sioner disposal procedures are
set forth in the appropriate
INFINITI Service Manual. Incor-
rect disposal procedures could
cause personal injury.
The front seat pre-tensioner seat belt system
activates in conjunction with the supplemental
front air bag. Working with the seat belt
retractor, it helps tighten the seat belt the
instant the vehicle becomes involved in cer-
tain types of collisions, thereby restraining
seat occupants.
SEATS, RESTRAINTS AND SUPPLEMENTAL AIR BAG SYSTEMS
1-19
Z 01.9.13/JR50-D X