Owner`s manual

3. Fill the radiator slowly with the proper
mixture of anti-freeze solution and dem-
ineralized water/distilled water. Fill the
reservoir tank up to the MAX level. Then
install the radiator filler cap.
4. Start the engine and warm it up until it
reaches normal operating temperature.
Then race the engine two or three times
under no load. Watch the engine coolant
temperature gauge for signs of overheat-
ing.
5. Stop the engine. After it completely
cools down, refill the radiator up to the
filler opening. Fill the reservoir tank up to
the MAX level.
6. Check the drain plug for any sign of
leakage.
7. Recheck the coolant level after the vehicle
has been driven for a day.
ENGINE OIL
CHECKING ENGINE OIL LEVEL
1. Park the vehicle on a level surface and
apply parking brake.
2. Run the engine until it reaches operating
temperature.
3. Turn off the engine. Wait more than 10
minutes for the oil to drain back into
the oil pan.
4. Remove the dipstick and wipe it clean.
Reinsert it all the way.
5. Remove the dipstick again and check the
oil level. It should be between the H and L
marks. If the oil level is below the L mark,
remove the oil filler cap and pour recom-
mended oil through the opening. Do not
overfill.
6. Recheck oil level with dipstick.
It is normal to add some oil between oil
maintenance intervals or during the
SID0206
SID0210
DO-IT-YOURSELF
8-7
Z 01.9.13/JR50-D X