Owner`s manual

A large difference between the diameters of
front and rear wheels will make the warning
light blink slowly (about once per two sec-
onds). Change the 4WD shift switch into 2WD
and do not drive fast.
CAUTION
O If the warning light comes on or
blinks slowly during operation or
rapidly after stopping the vehicle
for a while, have your vehicle
checked byan authorized INFINITI
retailer as soon as possible.
O Shifting between 4H and 4LO is
not recommended when the 4WD
warning light turns on.
O When the warning light comes
on, the 2WD mode may be en-
gaged even if the 4WD shift
switch is in AUTO or 4H. Be es-
pecially careful when driving. If
corresponding parts are malfunc-
tioning, the 4WD mode will not be
engaged even if the 4WD shift
switch is shifted.
O Do not drive on dry hard surface
roads in the 4H or 4LO position.
If the 4WD warning light turns on
when you are driving on dry hard
surface roads
O in the AUTO or 4H position,
shift the 4WD shift switch to
2WD.
O in the 4LO position, stop the
vehicle, move the automatic
transmission lever to the N
position, and shift the 4WD
shift switch to 2WD.
O If the warning light is still on after
the above operation, have your
vehicle checked by an authorized
INFINITI retailer as soon as pos-
sible.
O The transfer case may be dam-
aged if you continue driving with
the warning light blinking rapidly.
STARTING AND DRIVING
5-42
Z 01.9.13/JR50-D X