Owner`s manual
screw located on the sensor. Doing so
could cause failure or malfunction. If the
sensor installation part is deformed due to
an accident, contact an authorized INFINITI
retailer.
O Do not attach a sticker (including trans-
parent material) or install an accessory
near the sensor. This could cause failure
or malfunction.
BREAK-IN SCHEDULE
During the first 1,000 miles (1,600 km), follow
theserecommendationsforthefuturereliability
and economy of your new vehicle.
O Avoid driving for long periods at constant
speed, either fast or slow.
O Do not accelerate at full throttle in any
gear.
O Avoid quick starts.
O Avoid hard braking as much as possible.
O Do not tow a trailer for the first 500 miles
(800 km).
INCREASING FUEL
ECONOMY
O Accelerate slowly and smoothly. Maintain
cruising speeds with a constant accelerator
position.
O Drive at moderate speeds on the highway.
O Driving at high speeds will lower fuel
economy.
O Avoid unnecessary stopping and braking.
Keep a safe distance behind other vehicles.
O Select a gear range suitable to road con-
ditions.
O Avoid unnecessary prolonged engine
idling.
O Keep your engine tuned up.
O Follow the recommended periodic mainte-
nance schedule.
O Keep the tires inflated at the correct pres-
sure. Improper tire pressure will increase
wear and waste fuel.
O Make sure the front wheels are properly
aligned. Improper alignment will cause
premature tire wear and lower fuel
economy.
O Air conditioner operation lowers fuel
economy. Use the air conditioner only
when necessary.
O When cruising at highway speeds, it is
more economical to use the air conditioner
and leave the windows closed to reduce
drag.
O Use 4H position only when necessary. 4H
operation lowers fuel economy.
STARTING AND DRIVING
5-34
Z 01.9.13/JR50-D X