Owner`s manual

HOW TO CHANGE THE SET
VEHICLE SPEED
To cancel the preset speed, use any of
these methods:
O Push the CANCEL switch. The set vehicle
speed indicator will go out.
O Tap the brake pedal. The set vehicle speed
indicator will go out.
O Turn the ON/OFF switch off. Both the
ON/OFF switch indicator and set vehicle
speed indicator will go out.
To reset at a faster cruising speed, use
one of the following methods:
O Depress the accelerator pedal. When the
vehicle attains the desired speed, push and
release the COAST/SET switch.
O Push and hold the ACCEL/RES switch. The
set vehicle speed will increase by approxi-
mately 5 MPH (5 km/h for Canada).
O Push, then quickly release the ACCEL/RES
switch. Each time you do this, the set
speed will increase by approximately 1
MPH (1 km/h for Canada).
To reset at a slower cruising speed, use
one of the following methods:
O Lightly tap the brake pedal. When the
vehicle attains the desired speed, push the
COAST/SET switch and release it.
O Push and hold the COAST/SET switch. The
set vehicle speed will decrease by approxi-
mately 5 MPH (5 km/h for Canada).
O Push, then quickly release the COAST/SET
switch. Each time you do this, the set
speed will decrease by approximately 1
MPH (1 km/h for Canada).
To resume thepreset speed, push and re-
lease the ACCEL/RES switch. The vehicle will
resumethe lastsetcruising speedwhenthe ve-
hicle speed is over 25 MPH (40 km/h).
HOW TO CHANGE THE SET
DISTANCE TO THE VEHICLE
AHEAD
The distance to the vehicle ahead can be
selected at any time depending on the traffic
conditions.
Each time the DISTANCE switch is pressed,
the set distance will change to long, medium,
short and back to long again in that sequence.
STARTING AND DRIVING
5-29
Z 01.9.13/JR50-D X