Owner`s manual

4. Depress the brake pedal, move the selector
lever to N (Neutral) and start the engine.
5. Check stop light operation.
These instructions for starting the vehicle in N
(Neutral) should only be used until service
can be obtained. Never drive the vehicle if the
stop lights are not operating properly.
Push the button to shift into P, or from N to
R, P to R and D to 2. All other positions can
be selected without pushing the button.
P (Park):
Use this selector position when the vehicle is
parked or when starting the engine. Make sure
the vehicle is completely stopped. For maxi-
mum safety, depress the brake pedal, then
push in the selector lever button and move the
leverto thePposition. Applytheparking brake.
SIS0054 SIS0057
STARTING AND DRIVING
5-13
Z 01.9.13/JR50-D X