Owner`s manual

3. PTY SCAN tuning mode
Push the SCAN tuning button to tune the
PTY name station, and stop at each broad-
casting station for 5 seconds. Pushing the
button again during this 5 second period
will stop SCAN tuning and the radio will
remain tuned to that station. If the SCAN
tuning button is not pushed within 5
seconds, SCAN tuning moves to the next
station.
Cassette tape player operation
Turn the ignition key to ACC or ON, then
carefully insert a cassette tape into the tape
door.
The cassette tape automatically pulls into the
player. The word TAPE and moving digital
squares illuminate on the right side of the
display window.
CAUTION
Donot forcethecassettetapeinto the
tape door. This could cause player
damage.
The cassette tape automatically changes di-
rections to play the other side when the first
side is complete. At this time, the moving
digital squares illuminate on the left side of
the display window.
PLAY :
When the TAPE/CD button is pushed with the
radio turned on and the tape loaded, the radio
will automatically be turned off and the tape
will play.
If the TAPE/CD button is pushed during either
the FF, REW, APS FF or APS REW function,
the cassette tape enters the normal play mode.
When the TAPE/CD button is pushed with the
CD playing, the tape will play.
FF (fast forward),
REW (rewind) :
Push either the FF or REW button for the
desired direction.
The FF or REW symbol illuminates in the
display.
To stop the FF or REW function, press the FF
or REW button again, or the TAPE/CD button.
APS (automatic pro-
gram search) FF, APS
REW :
Push either the APS FF or APS REW button
while the cassette tape is playing. The tape
runs quickly, stops, then plays the next
selection. Either the FF or REW symbol
flashes in the display while searching for the
selection.
This system searches at the blank intervals
HEATER, AIR CONDITIONER AND AUDIO SYSTEMS
4-13
Z 01.9.13/JR50-D X