Owner`s manual

BATTERY REPLACEMENT
Replace the battery as follows:
1. Open the lid using a suitable tool.
2. Replace the battery with a new one.
Recommended battery: CR2025 or equiva-
lent
Make sure that the ! side faces the bot-
tom case.
3. Close the lid securely.
4. Push the keyfob button two or three times
to check its operation.
See your INFINITI retailer if you need any
assistance for replacement.
If the battery is removed for any reason
other than replacement, perform step 4
above.
O Be careful not to touch a circuit plate
and a battery terminal.
O An improperly disposed battery can
harm the environment. Always con-
firm local regulations for battery dis-
posal.
O The keyfob is water-proof. However,
if it does get wet, immediately wipe
completely dry.
O When changing batteries, do not let
dust or oil get on the keyfob.
FCC Notice:
Changes or modifications not expressly
approved by the manufacturer compli-
ance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the
FCC Rules and RSS-210 of Industry
Canada.
Operation is subject to the following two
conditions: (1) This device may not
cause harmful interference, and (2) this
device must accept any interference re-
ceived, including interference that may
SIP0311
PRE-DRIVING CHECKS AND ADJUSTMENTS
3-9
Z 01.9.13/JR50-D X