Owner`s manual

(Switching procedure)
Press and hold the LOCK and UNLOCK
buttons on the keyfob simultaneously for at
least 2 seconds to switch from one to the
other.
When pushing the buttons to set hazard
indicator only mode, the hazard indicator
flashes 3 times.
When pushing the buttons to set hazard
indicator and horn mode, the hazard indicator
flashes once and the horn chirps once.
(Operations)
Locking doors
1. Remove the ignition key.*1
2. Close all of the doors.*2
3. Push the LOCK button on the keyfob.
4. All of the doors lock.
All of the doors will lock when the LOCK
button on the keyfob is pushed even
though a door remains open and/or the
ignition key is in the ON position.
5. The hazard indicator flashes twice and the
horn chirps once.
When the LOCK button is pushed with all
doors locked, the hazard indicator flashes
SIP0289
PRE-DRIVING CHECKS AND ADJUSTMENTS
3-7
Z 01.9.13/JR50-D X