User Guide
Page 5UG10637-1.0 - Inca 500 User Guide V1.0
Please read the following important technical, safety
and environmental notices before installing and using
your amplifier.
Technical Notices
All reasonable design and engineering steps have been taken
to ensure that these amplifiers always perform satisfactorily in
their intended application and environment and will provide
appropriate levels of support to ensure that all reasonable
customer needs and expectations are met. Such support
however is contingent on the following provisions.
1. These amplifiers are Class-I products and should be
installed with a mains cable including the required earth
connection to comply with the Safety Class-I.
2. These amplifiers should always be installed by competent
and qualified personnel. Amplifier damage or failure caused
by installation or operational errors may invalidate support,
warranty or guarantees of performance.
3. These amplifiers are not suitable for use in locations where
they may be accessible to minors.
4. These amplifiers are intended to be used specifically for
the amplification of audio signals and for connection to
moving-coil loudspeaker systems. Use of these amplifiers
for amplification of signals outside the audio band (20Hz
to 20kHz) or to drive transducers other than moving-coil
loudspeakers may invalidate support, warranty or guarantees
of performance.
5. These amplifiers should only be used within professionally
installed and configured audio systems comprising input
and output ancillary equipments that is known to be of an
appropriate level of performance and in good operating
condition. Any damage to, or unsatisfactory performance
from, these amplifiers caused by inadequate or failed input
or output ancillaries may invalidate support, warranty or
guarantees of performance.
6. These amplifiers are intended to be installed and operated
indoor in a controlled environment (pollution degree, PD2)
within an ambient temperature range of 0°C to 40°C. These
amplifiers are not intended for use above 2000 meters above
sea level. Amplifiers installation or operated in environments
outside these limits may invalidate support, warranty or
guarantees of performance.
Safety and Environmental Notices
WARNING! TO PREVENT FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE.
Ambient Temperature Note: If this
equipment is operated in a confined or
multiple rack installation, the internal
ambient operating temperature
may exceed the external ambient
temperature. It is important to ensure in
these circumstances that the published
maximum operating temperature for the equipment is
not exceeded.
Reduced Air Flow: Ensure that rack or
other closed installation does not restrict
the cooling airflow required for safe and
reliable operation of the equipment.