User Guide

Page 28UG10637-1.0 - Inca 500 User Guide V1.0
Model Inca 500
Total System Power 500 W
Output Power @ 4/8Ω 4 x 125 W
Output Power @
70/100V*
2 x 250 W
Powershare (up to)
Across all channels
2 x 250 W
Power Consumption 150W
Dimensions
44 x 220 x 319 mm
(1.7 x 8.7 x 12.6 in)
Weight 2.8kg (6.2 lbs)
Output Circuitry UMAC™ Class D - full bandwidth PWM modulator with ultra-low distortion
Output Voltage 70Vp / 140Vpp (unloaded) // Bridged 140Vp / 280 Vpp (unloaded)
Signal To Noise-Ratio >106dB (A-weighted, 20Hz-20kHz, 8Ω load)
THD+N (typical) < 0.05% (20Hz-20kHz, 8Ω load, 3dB below rated power)
Frequency Response 20Hz-20kHz (+0/-0.25dB (8Ω load, 3dB below rated power)
Protection Circuits Short circuit -, DC -, Undervoltage -, Temperature - and Overload protection
Power Supply
UREC™ universal mains switch mode power supply with Power Factor Correction (PFC)
and standby converter
Operating temperature 0-40°C
Operating Voltage/
Frequency
Universal Mains, 100V-240V, 50Hz-60Hz
Standby Consumption < 0.5W
Accessories
2x Rack ears
1x ½ rack plate extension
2x ½ rack mounting
2x Rear supports
Power Ratings 1% THD @ 120Vac and 230Vac
*100V line mode is @ -1dB (≈ 90 V)
8 Specifications