User Guide

Page 27UG10637-1.0 - Inca 500 User Guide V1.0

7 Operations

7.2 Automatic Power Sharing

Inca 500 ampliﬁers incorporate a power sharing feature that automatically shares the

total power available from the ampliﬁer’s internal power supply across each pair of output

channels. If one channel temporarily demands more than the ampliﬁer’s continuous power

rating while other channel is demanding less, the excess power available from the internal

power supply is automatically made available to the over-power channel. Power sharing

optimises the ampliﬁer’s ability to deliver maximum power into dynamic loudspeaker loads

when playing music programme material.

7.3 Default Reset

Inca 500 ampliﬁers can be returned to their default settings via either the Control Web App

Settings Tab or the hardware reset pinhole button. The reset pin-hole button is located on

the underside panel of the ampliﬁer. With the ampliﬁer connected to mains power, use an

appropriate tool to press and hold the reset pinhole button for a few seconds. The ampliﬁer

will restart with all settings in their default, unused state. All previously conﬁgured settings

will be lost.