User Guide

Page 15UG10637-1.0 - Inca 500 User Guide V1.0

5.3.3 Output Tab

The Output Tab enables ampliﬁer outputs to be named and provides access to further

sub-menus. For all Output Tab menus, the ampliﬁer output under conﬁguration is selected

by highlighting one of the output identiﬁers (1, 2, 3 or 4) at the top of the display. The

Output Tab also enables Speaker Preset conﬁgurations to be created, exported, imported or

cleared. Figure 5.4 illustrates the Output Tab.

• The Routing menu enables zones to be assigned to ampliﬁer outputs.

Note: Routing for zones speciﬁed as stereo will automatically oer three output options:

left channel, right channel or summed mono. The summed mono signal can potentially be

used to drive a mono subwoofer.

• The Delay menu enables delay to be applied to individual ampliﬁer outputs.

• The Equalizer menu enables parametric equalization to be applied to individual ampliﬁer

outputs. Equalizer settings conﬁgured for one ampliﬁer output can be copied and applied

to other outputs.

Output name - type to edit

Select output

Select zone

Figure 5.4: Output Tab display

5 Conﬁgurations