User Guide

Page 13UG10637-1.0 - Inca 500 User Guide V1.0
Input name - type to edit
Select input sensitivity option
Adjust input gain
5 Configurations
Figure 5.1: Configuration Dashboard display
Figure 5.2: Input Tab display
Adjust zone volume
5.3 Configuration Menus
Opening a web browser that is network connected to an Inca 500 amplifier initially displays
the Inca 500 Web App Dashboard illustrated in figure 5.1. The Dashboard is the ‘home’ page
from which all other configuration options can be accessed.
The Dashboard displays the amplifier status, output zones and the configuration menu tabs.
It also enables immediate access to zone volume control The functions available under
each configuration menu tab are described in the following sections.
5.3.1 Input Tab
The Input Tab provides naming, mono/stereo selection, sensitivity, and gain trim for each
amplifier input channel. An internal pink noise source, provided for system testing and
set up, can also enabled or disabled, and adjusted for gain via the Input Tab. Figure 5.2
illustrates the Input Tab.
Note: When adjusting input gain, the input level display should remain green. If it displays
red, the input gain should be reduced.
Adjust zone volume