Service manual

HEC-Series Service Manual
INSTALLING YOUR TUBE-ICE MACHINE
10/21/01
3-1
3. Installing Your Tube-Ice Machine
Note: A video production is available through your distributor.
Installation Without Bin. Machine must be installed on a drainable condensate drip pan.
Bin Installation. Set the bin on solid, level footing. Inside the bin you will find the four legs. Screw
these legs to the bottom of the bin. You can make MINOR leveling adjustments by using these legs
as leveling screws, as outlined in the manufacturer’s instructions.
Once the ice storage bin is level, the Tube-Ice
®
machine can be elevated and placed inside the
condensate drip pan on the top of the bin.
FIGURES 3-1 and 3-2 illustrate two methods of lifting & setting Tube-Ice
®
machine on a level ice
storage bin.
! CAUTION !
The approximate weight of the machine is 1360 pounds. Always use
equipment with adequate load-carrying capacity.
! CAUTION !