Product Manual

Breckwell 1

11 12

TK004 ASSEMBLY INSTRUCTIONS

Caution! The appliance is very heavy.

The assistance from a second person is strongly suggested. Please use proper lifting technic when positioning the appliance

for assembly and installation.

Do not alter the existing ﬁ replace in any way either by removing bricks or mortar which could weaken the structural integrity

of the ﬁ replace.

ASSEMBLY INSTRUCTIONS

1) Lay pieces face down on carpet or other soft surface to protect ﬁ nish during assembly. The Surround consists of two side panels,

a top panel, and a decorative trim frame.

2) Bolt the top panel to the side panels so the top surfaces are ﬂ ush to one another.

3) Assemble the trim frame. The trim consists of a left and right side piece and a split top piece. These are joined by corner

connectors and two straight center connectors. These slide into the channel on the back of the frame and are secured with two

set screws in each piece.

4) The trim slides over the surround assembly and is secured at the base of each side with a machine screw.

5) The Surround Assembly is then slid over the appliance. Slots in the two side panels accommodate the hood at the top of the

appliance.

6) The surround assembly is held in place with two springs at the top of either corner of the appliance.

852255A

IN ORDER TO MAINTAIN WARRANTY, COMPONENTS MUST BE REPLACED USING ORIGINAL

MANUFACTURERS PARTS PURCHASED THROUGH YOUR DEALER OR DIRECTLY FROM

THE APPLIANCE MANUFACTURER. USE OF THIRD PARTY COMPONENTS WILL VOID THE

WARRANTY.

Key Part No. Description Qty.

1 26269 Surround, Top 1

2 26270 Surround, Left Side 1

3 26364 Surround, Right Side 1

4 83913 Spring 2

5 891992-1 Trim-R, Surround 1

6 891992-2 Trim-L, Surround 1

7 891992-3 Trim-Top_L, Surround 1

8 891992-4 Trim-Top_R, Surround 1

891993

Key, Straight 1

10 Key, Blank Straight 1

11 Key, Blank Corner

(Can Use 89420) 2

12 Key, Corner (Can Use 89419) 2