User guide

XTS-IP / XTSc-IP Station User Guide December 2005
66 In and Out Button
Conditions
» If a keyset user dials a station number that is in service, an error
tone sounds.
» If a keyset user dials a station number of an OOS keyset that has a
different model designation (Flash 50/51, Page B, Button #1), the
keyset will lose all of it’s configured station attributes. In this case,
the keyset will assume default attributes.
» This feature does not apply to Vodavi IP keysets.
In and Out Button
An In and Out Button will toggle a station from an in status to an out
status and from an out status to an in status. When in an out status, the
LCD will display “STA IN OUT OF OFFICE” and all incoming calls will
forward to the Preset Internal Busy Forward destination (Flash 50/51,
Page C, Button #2). If no forwarding destination is programmed in Flash
50/51, the call will be presented without forwarding. Attendant stations
and SLT stations do not have the In and Out feature capability.
To change In and Out status:
Press the preprogrammed In and Out Button (feature code 644).
Intercom
Using an Intercom Button
To program a Flexible Button as an Intercom Button:
1. Press the SPEED button twice.
2. Press the desired flexible button to program.
3. Dial [645] on the dial pad. A confirmation tone will sound. If an error
was made during entry, an error tone will sound.