User guide

XTS-IP / XTSc-IP Station User Guide December 2005
64 Headset Mode
Headset Mode
A modular headset may be used by connecting the headset to the
handset jack on the keyset (leaving the handset in place). A headset can
also be connected to the 2.5 mm jack that is located on the left side of
most Vodavi digital telephone models. The ON/OFF button on the
digital telephone (SPEAKER button on IP Phone) is used to initiate and
end calls while using the headset.
To activate Headset Mode:
Dial [634] on the dial pad,
-or-
Press the preprogrammed HEADSET MODE button.
-or-
Use the Soft Key’s HEADSET option when in an idle condition. The
LED will light steady.
To deactivate Headset Mode:
Dial [634] on the dial pad,
-or-
Press the preprogrammed HEADSET MODE button.
-or-
Use the Soft Key’s HEADSET option when in an idle condition. The
LED will extinguish.
 SINGLE LINE TELEPHONE
Not applicable
While Headset mode is active, the ON/OFF button
SPEAKER button on the IP Phone) activates the headset
and disables speakerphone and intercom call
announce operation at your station. To install the
headset, see the Installation Manual.
Station must be programmed in database
programming for headset operation before the flexible
button can be programmed.