User guide

Call Transfer 45
XTS-IP / XTSc-IP Station User Guide December 2005
Unanswered CO Call Transfer
While idle or on an internal/external call and an incoming or transferred
CO call is ringing at your station:
1. If on another call, place the current call on hold and replace the
handset or press ON/OFF (SPEAKER button on IP Phone).
2. Dial the INC CO XSFR code [639] or press preprogrammed INC CO
XSFR flexible button.
3. Press a DSS, Group button, or dial a station or group number. Call
automatically transfers to that destination.
4. You can then return to the call placed on hold.
Unscreened Transfer
1. Press the TRANS button.
2. When the called extension begins to signal, hang up to transfer the
call (the Recall Timer start).
3. Replace the handset or press the ON/OFF button (SPEAKER button
on IP Phone).
Trunk-To-Trunk Transfer
While connected to an outside line (PBX/Centrex):
1. Press TRANS. The transfer dial tone sounds.
2. Press a CO line / Loop flexible button.
-or-
Dial [9].
-or-
Dial a CO line/group access code.
3. Dial the desired outside line destination number.
4. Hang up to complete the transfer.
E911 feature enabled precludes dial 9 access.
LCR feature enabled precludes Loop button access.