User guide

Call Park 39
XTS-IP / XTSc-IP Station User Guide December 2005
Call Park - Station
Call park (by station number) allows external calls to be parked at a
station other than your own.
To park a call:
1. Press the TRANS button. The call is put on Exclusive Hold.
2. Dial [439] + [XXX] (XXX=station number).
-or-
1. Press the TRANS button. The call is put on Exclusive Hold.
2. Press the preprogrammed CALL PARK (Station) button.
3. Dial [XXX] (XXX = station number).
To retrieve a parked call:
Dial [# 6] + [XXX] (XXX = the station number used to park the call)
while at any telephone in the system, including the initiator’s.
-or-
Dial [438] from the initiator’s station.
To create a CALL PARK (Station) button:
1. Press [SPEED] + [SPEED].
2. Press the desired flexible button.
3. Dial [439] + [#]. A confirmation tone sounds.
 SINGLE LINE TELEPHONE
The SLT user cannot park a call using the Call Park - Station feature.
The SLT user can retrieve a Call Park - Station call by using the [#6]
procedure in the digital keyset section above.