User guide

XTS-IP / XTSc-IP Station User Guide December 2005
36 Call Forward
To remove Off-Net Call Forwarding:
1. Lift the handset or press ON/OFF (SPEAKER button on IP Phone).
2. Press the FWD button or dial either [640] or [662]. A confirmation
tone sounds and the FWD LED extinguishes.
SINGLE LINE TELEPHONE
The SLT operation uses the same procedures as used in Digital
Telephone operation described above, except there is no FWD
button. The user must use the 640 feature code to activate and 662
to clear.
Call Forward - Follow Me
The Follow Me feature lets a user who is away from their station,
activate/deactivate call forwarding from another station in the system.
This lets the user forward their calls to their current location or into
Voice Mail, ACD/UCD, Hunt Group, any other station in the system, or to
an off-net location. When this call forward is activated, all calls
presented to the forwarded station forward to the destination station
immediately.
To activate Follow Me Call Forwarding:
1. Lift the handset or press the ON/OFF button (SPEAKER button on IP
Phone).
2. Dial the Follow Me Forward code [642] on the dial pad.
3. Dial station number of the station from which forwarding is desired.
4. Dial the appropriate forwarding condition code.
[6] = All Calls [8] = Busy [
] = Off-Net
[7] = No Answer [9] = Busy/No Answer
5. Dial the three- or four-digit destination number where calls are to
be forwarded (Station, Voice Mail, ACD/UCD, Hunt Group, or speed
bin (only for off-net)).
6. Replace the handset or press the ON/OFF button (SPEAKER button
on IP Phone).