User guide

Call Coverage 33
XTS-IP / XTSc-IP Station User Guide December 2005
After a button is assigned, and that station receives a call:
1. You will receive audible and/or visual indications after a
programmable period of time: an internal ring tone, and/or the
same flash rate as the incoming CO line ringing rate.
 Ringing option = ringing, flashing Call Coverage LED, LCD
display as in following illustration:
 Non-Ringing option = flashing Call Coverage LED only (no
ringing or change to LCD)
2. Then press the flashing COVERAGE flexible button,
-or-
Press the ON/OFF button (SPEAKER button on IP Phone).
The call is answered and will cease to ring at any other stations that
may have the same coverage appearance.
After the call is answered, one of the following messages will
display:
Non-network system or in same Node:
Network system with call passed across a switch:
XXXXXXXXX = Name of calling party
YYYYYY = Specific CO Line type being used (e.g., PRI #23)
HH:MM:SS = Amount of time on the call
CALL FOR STA XXXX
MMM DD YY HH:MM am
CALL FOR STA XXXX
FROM STA YYYY HH:MM:SS
XXXXXXXXX CALLING
YYYYYY HH:MM:SS