User guide

XTS-IP / XTSc-IP Station User Guide December 2005
32 Call Coverage
Call Coverage
The Call Coverage feature provides the functionality for stations to
answer calls for other stations by utilizing call coverage buttons. Visual
and Audible status of ringing stations to an assigned coverage station
are provided. Multiple coverage stations can have the same remote
ringing station(s) programmed on their stations. Once a coverage
station answers the call, other stations attempting to answer the call
receive a busy tone and the call coverage button extinguishes on all
appearances of that button.
The Call Coverage button also functions as a DSS/BLF button for the
covered station; therefore, when the Call Coverage button is pressed,
the covered station is called. Also, when the covered station goes off
hook, the Call Coverage button’s BLF is lit.
Direct CO calls have ring and LCD priority over call coverage calls. The
coverage station must have a direct CO appearance or Loop button in
order to pick up an external call. If the coverage station is in DND, no
audible ringing occurs, however visual and LCD information is
presented.
To assign a Call Coverage Button:
1. Press [SPEED] + [SPEED].
2. Press a desired flexible button.
3. Dial [647] for Non-Ringing or [646] for Ringing, followed by the
station number to cover. A confirmation tone will sound.