User guide

Call Back 31
XTS-IP / XTSc-IP Station User Guide December 2005
Call Back
A station can initiate a call back request to another busy station. Once
that station becomes idle, the station that left the call back request is
signaled.
To leave a Call Back request when a number is busy:
1. Either press the preprogrammed CALL BACK flexible button or use
the Soft Key’s CALL-BK option (press the MSG/CALLBK button on
IP-24DH or IP7024D Phone).
2. Replace the handset or press the ON/OFF button (SPEAKER button
on IP Phone). When the busy station hangs up, you will be signaled.
3. Answer the call; the station you called will then be signaled. (If your
station is busy when signaled, an automatic MSG will be placed at
your phone.) Only one Call Back request can be left at a station; the
second request will leave a message wait callback request.
 SINGLE LINE TELEPHONE
To leave a Call Back request when a number is busy:
1. Press the FLASH button.
2. Dial [622] and replace the handset.
When the Automatic Call Back Timer is enabled, a call
back request is automatically invoked anytime you
listen to a busy intercom tone for a preset period of
time (default = 10 seconds).
Only one Call Back request can be left at a station; the
second request will convert to a message waiting
request.