User guide

XTS-IP / XTSc-IP Station User Guide December 2005
28 Attendant Features
Attendant Speed Dial - System Storing
System Speed numbers must be entered by the first programmed
Attendant. If an Attendant is not specified, enter at Station 100.
1. Press SPEED once, then press the desired outside line key,
-or-
Press SPEED twice to select an outside line automatically.
2. Dial the System Speed bin location (9020-9999 or
9020-9099 for XTSc-IP).
3. Dial telephone number.
4. Press SPEED.
5. Hang up.
Speed Dial Options
To use the following speed dial options, enter as shown:
Initiate a Pulse-To-
Tone Switchover
- Press TRANS during number entry.
Insert a Pause - Press HOLD during number entry.
Insert a Flash into
the Speed Number
- Press FLASH.
Insert a Non-Display
Character
- Press TRANS as the first entry in the speed bin.
This causes the numbers stored in the bin not
to display on the Digital Telephones when the
bin is accessed.
Speed Bin numbers 9060-9099 are not monitored by Toll
Restriction.