User guide

Attendant Features 23
XTS-IP / XTSc-IP Station User Guide December 2005
To use this feature:
1. Press the preprogrammed NIGHT SERVICE button once
(631, DND by default),
-or-
Use the Soft Key’s DND option when in an idle condition (LED is lit
solid).
2. Press the DND button or Soft Key again to activate the Special
mode (LED flashes).
 The DND button (by default) or Soft Key acts as a rotary in this
manner, starting in Day mode, Night mode, then Special mode.
 When one Attendant activates this mode, other Attendant
stations’ DND buttons are lit accordingly.
Attendant Directory List Programming
The Attendant can program up to 200 names in the directory list. When
the directory list is accessed by any display telephone user, the system
displays the name associated with a speed dial number so when the
desired name is shown, the user may have the system dial the number.
To access Directory List Programming:
Dial the Directory List program code [693]. The HOLD button will
illuminate and the first entry (000) in the Directory List will display:
DIR LST AAA BIN/ICM: XXXX
nnnnnnnnnnnnnnnnnnnnnnn
AAA = Directory List entry number (000-199)
XXXX = One of the following:
» 3- or 4-digit station number (100-8999)
» 3-digit local number/name translation table number
(600-799 minus station numbers that would overlap)
» 4-digit remote device number (1000-8999 minus
(1000-8999 minus station numbers that would overlap)
» 4-digit system speed bin number (9020-9999 for XTS-IP,
9020-9099 for XTSc-IP)
nnn = Programmed Name (blank, if none)