User guide

XTS-IP / XTSc-IP Station User Guide December 2005
22 Attendant Features
3. Enter the letters for the custom message using the dial pad keys as
shown:
 Up to 24 alphanumeric characters may be entered (represents
48 digits). Characters display when entered.
 Attendant must go idle after programming a message before
another message may be programmed.
4. Press the HOLD button to enter message. A confirmation tone will
sound.
Attendant Day/Night/Special
The system’s Automatic Night Mode Feature can be overridden by the
Attendant station. Any Attendant station user can press their DND
button or a Soft Key to place the system into Night Mode.
Other Codes
1 = 1# 8 = 8# “ = 01 * = *#
2 = 2# 9 = 9# , = 02 ( = #1
3 = 3# 0 = 0# ? = 03 ) = #2
4 = 4# Space = 11 / = 04 + = #3
5 = 5# : = 12 ! = *1 = = #4
6 = 6# - = 13 $ = *2 # = ##
7 = 7# ‘ = 14 & = *4 . = 24
The Night Service feature provides a means to place the
system in night mode or remove the system from night mode
from any keyset, providing the system was put in night
mode by the night service feature flexible button [604].
If the system was placed in night mode by the Attendant
using the DND button, or if the system was placed in night
mode by the automatic schedule, the night service flexible
button cannot remove the system from night mode.
A - 21
B - 22
C - 23
D - 31
E - 32
F - 33
G - 41
H - 42
I - 43
J - 51
K - 52
L - 53
M - 61
N - 62
O - 63
T - 81
U - 82
V - 83
W - 91
X - 92
Y - 93
Z - 94
P - 71
R - 72
S - 73
Q - 74
#
0
0PER
1
*
D - 31
E - 32
F - 33
OR