User guide

XTS-IP / XTSc-IP Station User Guide December 2005
18 Alternate Dial Plan
To remove call forwarding:
1. Lift the handset or press the ON/OFF button (SPEAKER button on IP
Phone).
2. Press the FWD button. A confirmation tone will sound and the FWD
LED will extinguish.
Alternate Dial Plan
When you use an MPBE, the 3-digit default dial plan uses station
numbering of 100-419 (320 stations) and feature code numbering
beginning with feature code 420 as shown in the “Default Numbering
Plan” on page 125.
When your system has more than 320 stations, default station
numbering would cause conflicts with default feature code numbering.
For example … physical station number 321 would be station 420 in the
default numbering plan, and this conflicts with VM Msg Set default
feature code of 420.
The Alternate Dial Plan programming feature is used when your system
has more than 320 stations (using an MPBE). The default Alternate Dial
Plan uses station numbering of 100-591 (492 stations) and feature code
numbering that uses the 3-digit default dial plan with a leading digit of
8, resulting in a 4-digit feature code plan.
For example … the VM Msg Set default feature code of 420 becomes
8420.
EXCEPTIONS -- Feature code numbering under the default Alternate Dial
Plan is as described above with the following exceptions:
 6540 (Answering Machine Emulation w/ringing) is changed to 8665
 6541 (Answering Machine Emulation w/speaker) is changed to 8666
 88 (CO Line Direct Access) is changed to 8888
 89 (Loop Key) is changed to 8889
The Alternate Dial Plan does not apply to MPB1 or MPB2
systems.