User guide

Speed Dial 105
XTS-IP / XTSc-IP Station User Guide December 2005
To program multiple speed numbers:
1. Press the SPEED button twice to conclude programming a number.
2. Enter the next speed number bin to program.
If the station has no line appearance for the line programmed into
the speed bin, that line comes up under the LOOP button or POOL
button when accessed.
To erase an existing speed bin:
1. Press the SPEED button twice.
2. Dial the speed bin location.
3. Press the SPEED button again. A confirmation tone will sound.
 SINGLE LINE TELEPHONE
To use speed dial:
1. Lift the handset.
2. Dial [668] on the dial pad.
3. Dial the desired station or system speed bin number.
4. Replace the handset to end the call.
To store speed dial numbers:
1. Lift the handset.
2. Dial [661] on the dial pad.
3. Dial the desired station speed number (9000-9019).
4. Dial the telephone number to store.
5. Press the FLASH button. A confirmation tone will sound.
Line Group 1 is programmed along with SLT speed
numbers, and thus Line Group 1 is used when
activating station speed dial from an SLT.