User guide

XTS-IP / XTSc-IP Station User Guide December 2005
104 Speed Dial
Speed Dial
A keyset user can associate up to 20 frequently dialed numbers as
Station Speed Numbers (9000 to 9019). Telephone numbers can be up
to 24 digits including pauses, flash commands, pulse-to-tone
switchover, and non-display characters. A pause is automatically
inserted after a flash.
To use speed dial:
1. If an outside line was not specified in programming, one can be
selected now or the system will assign the line.
2. Press the SPEED button and dial speed bin location,
-or-
Press the preprogrammed speed bin button,
-or-
Use the Soft Key’s SPD option and then dial a speed bin location
when in an idle condition.
To store speed dial numbers:
1. Press the SPEED button once.
2. Press an OUTSIDE LINE button or the POOL button.
-or-
Select an outside line by pressing the SPEED button again.
3. Dial the speed bin location.
4. Dial desired telephone number and include these special codes:
5. Press the SPEED button.
6. Replace the handset to end the speed bin programming.
TRANS -- Initiates a Pulse-To-Tone switchover.
HOLD -- Inserts a Pause.
FLASH -- Inserts a Flash into the speed number.
TRANS -- When used as first entry in speed bin, this inserts a non-
display character causing numbers stored in the bin not to
appear on a digital phone’s display when bin is accessed.