User guide

Speakerphone 103
XTS-IP / XTSc-IP Station User Guide December 2005
To view call forwarding status of Classroom telephones:
1. The Administrator uses a station assigned as an Administrator
station and dials feature code [630] + [#]. A confirmation tone
sounds and the LCD updates to show one of the following displays:
2. Press [ON/OFF] (SPEAKER button on IP Phone) to return to an idle
status.
Conditions
» A station can be assigned as an Administrator or as a Classroom,
but not as both.
» A call from an Administrator station to a Classroom station
overrides any School Zone call forward settings and the call rings at
the Classroom station.
» School Zone call forwarding overrides station user call forwarding
and DND.
» If an E-911 button is programmed, both audible and visual alert
indications will be provided, regardless of School Zone call forward
settings.
» The School Zone call forwarding feature does not apply to a
Classroom station a hunt group or an ACD/UCD group.
Speakerphone
1. Press the ON/OFF button (SPEAKER button on IP Phone) to ON. (An
intercom dial tone will sound.)
2. Press the DSS key of desired party, or press an available OUTSIDE
LINE button and dial number. The speakerphone will be activated.
3. Press ON/OFF button (SPEAKER button on IP Phone) to end the call.
CLASSROOM STATUS
BSY FWD TO XXXX
CLASSROOM STATUS
B/NA FWD TO XXXX
CLASSROOM STATUS
NA FWD TO XXXX
CLASSROOM STATUS
FWD TO XXXX